The working principle of the top dust collector: welding flange and cement bin (or other powder container) welded together as the support of the dust collector; the sealing tube box is connected with the welding flange with the connecting clamp; the vibrating disc is sandwiched between the seal cylinder and the upper box; the filter core is interference and the vibrating disc is assembled; so that the filter core is dense. The sealing box, vibrating disc welding flange and cement bin form a public filter element which can be connected with the upper cylinder box to connect the barrel body. At the same time, the upper cylinder box communicates with the atmosphere as gas discharge or replenishment. When the bulk cement pump delivers powder to the silo, there is a certain pressure difference outside the silo, the gas is discharged from the warehouse and the filter core is used to filter the dust to clean the air. When the screw machine supplies the powder machinery to the powder machine, the pressure is less than the atmospheric pressure so that the air is supplied to the silo to make the spiral machine work normally.
The function of the main components of the dust collector:
First of all, the vibration motor, it is a kind of often eccentric vibrator, three phase motor when the motor runs, the eccentric vibrator produces centrifugal force, and the vibrator is vibrated as a whole, and its vibration power can be adjusted by the eccentric oscillator.
Secondly, the filter element is the most basic part of the dust collector, and is the key to the accuracy and life of the duster. It mainly depends on the quality and the usage of the filter cloth.
Finally, the vibration disk is the main component of the cleaning work together with the vibrating motor, and its effect directly affects the cleanup degree of the filter element.
Usage method
1. The intake pressure is not more than 0.1-0.15 (MPa) when the material is transferred to the cement storehouse, otherwise the pressure will be bent too high. The cement bin must install the material position meter to prevent the filter core from bending when it is full. After the cement bin is finished, start the vibration motor to remove dust. The motor vibration is closed for 5-6 minutes. The time permits the best vibration dust removal for 30 minutes to close.
2, every two to three months, remove the filter core, use dry pressure air to filter cartridge blowback, clean up, improve the filtration capacity of the filter element.
3, generally in the dust collector before the factory has made the spring vibration adjustment, every time dismantling and installation must ensure tight.
Technical parameters
Filter area: 18/24 square meter
Handling air volume: 1433.48L/MIN
Filtration efficiency: 99%
Filter core dosage: 14
Filter core specification: 165*125*910 (650) mm
155*85 *900 (650) mm
Special specifications can be designed, processed, manufactured and produced according to user requirements.
