PTFE coated dust filter cartridge

• Environmental protection and energy saving running smoothly

• Handle large air volume and strong dust removal
  

• Dust removal efficiency of more than 99.9%, fully in line with regional emission standards
  

• Easy maintenance and replacement
  

• Customized quality assurance on demand
  

• Solve the dust removal problem once
  

• More than ten years of industry experience one-stop service
  

• Good faith manufacturers have after-sales protection

Lifeldt PTFE coated dust filter cylinder Product introduction:

PTFE coated dust filter cartridge is a star-shaped filter cartridge made of a certain length of crisp filter material folded into a pleat and glued to the end. The filter drum has no cage bone, and there are many varieties of simple filter drums installed, which are thin and long and thick and short. Long and thin filter cartridge (such as Φ≤160, L=1 ~ 2m), the gap between the pleats (such as 45 pleats) is large, the Angle is large, the pleats are small and shallow, the filter area is 2 ~ 5 times larger than the filter bag with the same diameter and length, and the ash is easy and the effect is good; Suitable for concentration ≥15g/m dust filtration dust removal, filtration wind speed 0.6 ~ 1.2m/min. Thick and short filter cylinder (such as Φ350, L=0.66m) large diameter, short length, more pleats (120 ~ 350 pleats) and deep, small gap between pleats, large filtration area, compared with the same diameter and length filter bag area of 14 ~ 35 times, suitable for small site area, small space arrangement; However, due to small fold Angle, dust is easy to accumulate, difficult to clean ash, suitable for concentration ≤5g/m dust filtration dust removal, filtration wind speed should not be >0.6m/min.

There are three kinds of installation methods of filter cylinder pulse dust collector: vertical, inclined and horizontal installation. When the filter cylinder is installed vertically, the dust is easy to settle to the ash hopper when the pulse cleaning, and the effect is good. When inclined installation, the upper and lower filter cartridges are stacked, the structure is compact, the floor area is small, and the cylinder is easy to change, but when cleaning, the dust from the upper filter cartridge settles on the lower filter cartridge and is difficult to remove. Horizontal installation, the dust above the lower filter cylinder is more difficult to remove. Inclined cylinder dust collector is suitable for small and medium-sized dust removal system non-viscous, low concentration, coarse dust removal, but also suitable for some old bag dust remover.

PTFE coated dust filter cylinder imported from the United States Liefert product features:

1, greatly improve the effective filtration area;

2, ensure a low and stable pressure difference, improve the flow of air;

3, the filter cartridge element is small, easy to install;

4, especially suitable for industries with large dust concentration.

PTFE coated dust filter cylinder performance characteristics:

PTFE coated dust filter is especially suitable for both fibrous dust and non-fibrous dust occasions.

Especially suitable for easily coalesced dust,

Ultra-thin fibers can filter fine dust particles on the surface of the filter material, thereby extending the life of the filter cartridge.

Wide fold with hoop design for easy removal of fibrous and coalescing dust particles.

For 1 micron size dust particles, the filtration efficiency can reach 99.999%.

It can be washed. The filter is suitable for applications with both fibrous and non-fibrous dust, for applications with easily coalesce dust, and for applications where the filter cartridge needs to be washed during use. Examples include wood processing, grain handling, grinding of composite materials, polishing of metals, and applications such as food processing and pharmaceuticals.

The filter material can effectively filter fine dust particles on the surface of the filter material, thus strengthening the pulse cleaning effect, extending the life of the filter cylinder, and having a higher filtration efficiency.

Proprietary synthetic fibers with an average diameter of 0.2 microns

Proprietary hybrid synthetic fibers with an average diameter of 12 microns ~

Relative filtration efficiency: The efficiency can reach 99.999%.

Wear resistance: excellent

Structure: galvanized steel lining and end cover

Temperature: 180F/82℃

Washable: the filter cartridge can be cleaned several times, and can be used again after being completely dried, and the filtration efficiency of the filter cartridge will be slightly reduced after being washed.

PTFE coated dust filter cartridge application field:

Pigments, plastics, electronics, tires, steel plate pretreatment, fly ash, ceramics, refining, rubber, cement, titanium dioxide, bin top materials and other dust occasions.