Gas turbine special nanofilter dust filter cartridge

• Product Details

• Environmental protection and energy saving running smoothly

• Handle large air volume and strong dust removal
  

• Dust removal efficiency of more than 99.9%, fully in line with regional emission standards
  

• Easy maintenance and replacement
  

• Customized quality assurance on demand
  

• Solve the dust removal problem once
  

• More than ten years of industry experience one-stop service
  

• Good faith manufacturers have after-sales protection

Product Introduction:

Xinxiang Lifelte Filter Co., Ltd. specializes in the production of gas turbine special nanofilter dust filter cartridge. The air dust filter cartridge is a star-shaped filter cartridge formed by folding the length of the clean filter material and bonding the tail. Filter cylinder without cage bone, easy to install. There are many varieties of air dust filter cartridges, which are thin and long and thick and short. Long and thin filter cartridge (such as Φ≤160, L=1 ~ 2m), the gap between the pleats (such as 45 pleats) is large, the Angle is large, the pleats are small and shallow, the filter area is 2 ~ 5 times larger than the filter bag with the same diameter and length, and the ash is easy and the effect is good; Suitable for concentration ≥15g/m dust filtration dust removal, filtration wind speed 0.6 ~ 1.2m/min. Thick and short filter cylinder (such as Φ350, L=0.66m) large diameter, short length, more pleats (120 ~ 350 pleats) and deep, small gap between pleats, large filtration area, compared with the same diameter and length filter bag area of 14 ~ 35 times, suitable for small site area, small space arrangement; However, due to small fold Angle, dust is easy to accumulate, difficult to clean ash, suitable for concentration ≤5g/m dust filtration dust removal, filtration wind speed should not be >0.6m/min. The air dust removal filter cartridge is a star-shaped filter cartridge formed by folding the length of the filter material into a pleat and gluing the tail. Filter cylinder without cage bone, easy to install. There are many varieties of filter cartridges, which are thin and long and thick and short. Long and thin filter cartridge (such as Φ≤160, L = 1 ~ 2m), the gap between the pleats (such as 45 pleats) is large, the Angle is large, the pleats are small and shallow, the filter area is 2 ~ 5 times larger than the filter bag with the same diameter and length, and the ash is easy and the effect is good; Suitable for concentration ≥15g/m dust filtration dust removal, filtration wind speed 0.6 ~ 1.2m/min. Thick and short filter cylinder (such as Φ350, L = 0.66m) large diameter, short length, more pleats (120 ~ 350 pleats) and deep, small gap between pleats, large filtration area, compared with the same diameter and length filter bag area of 14 ~ 35 times, suitable for small site area, small space arrangement; However, due to small fold Angle, dust is easy to accumulate, difficult to clean ash, suitable for concentration ≤5g/m dust filtration dust removal, filtration wind speed should not be > 0.6m/min.

Installation method:

There are three kinds of installation methods of pulse dust collector: vertical, inclined and horizontal installation. When the filter cylinder is installed vertically, the dust is easy to settle to the ash hopper when the pulse cleaning, and the effect is good. Inclined installation, the upper and lower filter cylinder overlapping, compact structure, small footprint, easy to change the cylinder, but when cleaning, the dust from the upper filter cylinder settled on the lower filter cylinder, the inclined installation filter cylinder dust collector is suitable for small and medium-sized dust removal system non-viscous, low concentration, coarse dust removal, but also suitable for some old bag dust remover.

Performance characteristics:

The whole dust removal system is compact, and the reliability and environmental protection of the system are fully considered in the design. A guide plate is designed at the dust collector, which reduces the impact of dust containing gas on the filter cartridge and prolongs the service life of the filter cartridge. The wide box structure design reduces the body resistance of the dust collector. Reasonable man-machine design concept, convenient equipment inspection repair and maintenance. The control system is designed to ensure that the equipment always works under low power consumption conditions.

Technical parameters:

1, greatly improved filtration area;

2, ensure a low and stable pressure difference, improve the flow of air;

3, the filter cartridge element is small, easy to install;

4, especially suitable for industries with large dust concentration.

Application field:

Suitable for high temperature flue gas filtration in steel, metallurgy, carbon black, power generation, cement, chemical industry, etc. Glass fiber needle felt dust collector bag can be used in the automotive industry sound absorption, shock absorption, flame retardant, mainly used in the industry in the filter field; Glass fiber needled felt is widely used in flue gas purification and dust recovery of carbon black, steel, non-ferrous metals, chemical industry, incineration and other industries.