Dust filter cartridge for electric sweeper

Product overview:

The dust removal filter cartridge of the electric sweeper is a star-shaped filter cartridge formed by folding a certain length of the clean filter material into a fold and gluing the end to the end. Filter cylinder without cage bone, easy to install.

There are many varieties of dust filter cartridges, which are thin and long and thick and short. Long and thin filter cartridge (such as φ≤160, L=1 ~ 2m), the gap between the pleats (such as 45 pleats) is large, the Angle is large, the pleats are small and shallow, the filter area is 2 ~ 5 times larger than the filter bag with the same diameter and length, and the ash is easy and the effect is good; Suitable for concentration ≥15g/m dust filtration dust removal, filtration wind speed 0.6 ~ 1.2m/min. The coarse and short filter cylinder (such as φ350, L=0.66m) has large diameter, short length, more pleats (120 ~ 350 pleats) and deep, small gap between pleats, large filtration area, 14 ~ 35 times larger than the same diameter and length filter bag area, suitable for small site area and small space. However, due to small fold Angle, dust is easy to accumulate, difficult to clean ash, suitable for concentration ≤5g/m dust filtration dust removal, filtration wind speed should not be >0.6m/min.

There are three kinds of installation methods of the pulse dust collector: vertical, inclined and horizontal installation. When the filter cylinder is installed vertically, the dust is easy to settle to the ash hopper when the pulse cleaning, and the effect is good. When inclined installation, the upper and lower filter cartridges are stacked, the structure is compact, the floor area is small, and the cylinder is easy to change, but when cleaning, the dust from the upper filter cartridge settles on the lower filter cartridge and is difficult to remove. Horizontal installation, the dust above the lower filter cylinder is more difficult to remove. Inclined cylinder dust collector is suitable for small and medium-sized dust removal system non-viscous, low concentration, coarse dust removal, but also suitable for some old bag dust remover.

Product characteristics:

1, greatly improve the effective filtration area;

2, a low and stable pressure difference, improve the flow of air;

3, the filter cartridge element is small, easy to install;

4, especially suitable for industries with large dust concentration.

Product action:

Widely used in food, feed, metallurgy, building materials, cement, machinery, chemical, electric power, light industry dust gas purification and dust material recovery.

Product feature:

More product recommendations:

Road sweeper dust filter cartridge

Steel mill high temperature resistant aramid folding filter cartridge