high quality filter for Oil suction Filter Element(3/4'BSPThread , 8Liter/Min Suction Strainer
1、Introduction
Suction Strainer Elements are designed for installation into suction lines of pumps.
Extra caution should be taken to ensure that the suction elements are always mounted
below the minimum oil level of the reservoir. Standard models have nominal filtration
ratings of 74 or 125 microns. The suction strainer elements can also be supplied with
a bypass valve to reduce high pressure drops caused by contaminated elements or high
viscosity fluids during cold starting. The bypass valve opens at 3 psi. For best results,
suction strainer elements should be sized for clean element pressure drops off no higher
than 0.5-.07 psi.
2、Features
Stainless steel mesh
Re-usable
Epoxy bonded joints for compatibility with all fluids
Rugged steel inner support
Nylon fitting/Nylon end caps (210° max)
100~125 mesh from stock
3、Options
No by-pass or 3 psi by-pass available
Custom sizes and mesh are available upon request
Model: LESF-KH1(No by-pass )
Norminal Flow:8Liter/Min
Pipe Size: 3/4'BSP
OD: 66mm, 3in
Length:50mm,1.97in
4、Quality assurance
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
