Position: HOME > Product > Application > Pharmacy >
Reverse Osmosis Membrane Model ESNA1-LF-LD Applied In Pharmaceutical Water

Reverse Osmosis Membrane Model ESNA1-LF-LD Applied In Pharmaceutical Water

Read 0 Reviews23 Q&As Write a Review
The ESNA1-LF-LD reverse osmosis membrane is an advanced, anti - fouling, energy - saving nanofiltration composite membrane with a fine pore structure. It effectively removes impurities, bacteria, and viruses from water, ensuring high - quality purified water for the pharmaceutical industry and guaranteeing the safety and reliability of pharmaceutical water.

PARAMETER

Brand Name:
Model Number:
Nominal filtration rating:
Application:
Operating pressure:
Working temperature:
Replacement or not:Replacement

Introduction

LEFILTER, a leading Chinese manufacturer specializing in fluid purification solutions, introduces the Reverse Osmosis Membrane Model ESNA1-LF-LD. Engineered for high-efficiency desalination and water purification, this membrane is ideally suited for pharmaceutical, food & beverage, and industrial applications requiring ultra-pure water. As a direct replacement for Hydranautics’ ESNA1-LF-LD, the model delivers superior performance, durability, and compliance with international standards such as USP and EP.


Technical Parameters

The ESNA1-LF-LD is a low-energy, high-performance reverse osmosis (RO) membrane designed for challenging water sources. Key specifications include:

ParameterSpecification
ModelESNA1-LF-LD
Filtration TypeReverse Osmosis (RO)
Nominal Size4” x 40” (101.6 mm x 1016 mm)
Effective Area85 ft² (7.9 m²)
Max Operating Pressure150 psi (10.3 bar)
Max Temperature122°F (50°C)
pH Range4.0–11.0 (continuous operation)
NaCl Rejection99.5% (at 2,000 ppm NaCl, 225 psi, 77°F, 15% recovery)
Flow Rate2,200 GPD (8.3 m³/d)
MaterialPolyamide composite
Seal MaterialEPDM, Buna-N, Viton®
StandardsISO 9001, ISO 14001, NSF/ANSI 61, FDA (food contact)

Reverse Osmosis Membrane

Working Principle

The ESNA1-LF-LD operates based on the reverse osmosis principle:

  1. Pre-Filtration:

    • Feed water passes through a 5-μm Security filters to remove particulates.

  2. Reverse Osmosis:

    • High-pressure pumps force water through the semipermeable polyamide membrane, which rejects dissolved solids (e.g., salts, organics) and allows pure water to pass.

  3. Separation:

    • Concentrated contaminants  are discharged, while purified water is collected for downstream use.


Performance & Advantages

  1. High Salt Rejection:

    • 99.5% NaCl rejection ensures ultra-pure water for critical applications.

  2. Low Energy Consumption:

    • Operates at 150 psi (10.3 bar), reducing energy costs by up to 30% compared to traditional membranes.

  3. Anti-pollution design:

    • Hydrophilic surface and optimized flow channels minimize fouling, extending service life and reducing cleaning frequency.

  4. Wide Compatibility:

    • Fits standard 4” pressure vessels and integrates seamlessly with existing RO systems.

  5. Chemical Resistance:

    • Resists chlorine (up to 1,000 ppm·hrs), acids, and alkalis, ensuring durability in harsh environments.


Product Structure

The ESNA1-LF-LD features a spiral-wound design with the following components:

  1. Polyamide Composite Membrane:

    • Thin-film composite (TFC) layer for high rejection and permeability.

  2. Support Layer:

    • Non-woven fabric for structural integrity.

  3. Feed Spacer:

    • Creates turbulence to enhance mass transfer and reduce fouling.

  4. Glass Fiber Reinforced Polypropylene (GFRP) Housing:

    • Corrosion-resistant and pressure-tolerant.

  5. O-Ring Seals:

    • Ensure leak-proof operation and prevent bypass flow.


Application in Pharmaceutical Water Treatment

The ESNA1-LF-LD is critical for pharmaceutical applications:

  1. Purified Water (PW) and Water for Injection (WFI):

    • Removes endotoxins, bacteria, and particulates to meet USP, EP, and JP standards.

  2. Process Water:

    • Ensures high-quality water for formulation, cleaning, and equipment rinsing.

  3. Wastewater Recycling:

    • Recovers solvents and reduces wastewater discharge, supporting sustainability goals.


Reverse Osmosis Membrane

Other Industrial Applications

  1. Food & Beverage Industry:

    • Clarifies juices, wines, and dairy products; removes pathogens for shelf-life extension.

  2. Power Generation:

    • Treats boiler feedwater to prevent scaling and corrosion.

  3. Electronics Manufacturing:

    • Produces ultra-pure water for semiconductor fabrication.

  4. Oil & Gas:

    • Desalinates produced water for reuse in hydraulic fracturing.


Conclusion

LEFILTER’s Reverse Osmosis Membrane Model ESNA1-LF-LD combines cutting-edge technology with robust construction to deliver reliable, high-quality water purification for pharmaceutical and industrial applications. Its advanced features, energy efficiency, and compliance with international standards make it the ideal choice for businesses seeking sustainable and cost-effective solutions.

Common Part Numbers

DowHydranauticsTorayCSMGEVONTRON
BW30XFR-400/34ESPA1-4040TMH20A-400CRE4040-BLRAG8040F-400FR,34SW4040HR
BW30FR-400/34CPA2-4040TMH20A-440CRE8040-BEAG8040F-400ULP21-8040
BW30-400/34C   PA3-LDTMG20-370CRE8040-BLNAG8040F-400LFULP2012
BW30-400/34iSWC5-LDTMG20-400CRE8040-BLRAG4040FMULP1812
BW30-400ESPA2-4040TMG20-440CRE4040-BLNAG8040F-365ULP32-8040
BW30-400IGYQS-4040TMG20D-400RE4040-BEAG8040N-400ULP31-4040
BW30-365ESPA2-7TMG20D-440L-RO-4040AK4040FMULP22-8040
BW30XFR-400/34iCPA6-LDTM720-370RE1812-HR50AG4040FULP21-4040
BW30FR-400/34iESPA2 MAXTM720-400RE1812-HR75ETC.ETC.
BW30HRLE-440LFC3-LDTM720-440RE1812-HR100

BW30HRLE-440iESPA2TM720C-440RE4021-TE

XFRLE-400/34iPR0C10TM720D-370RE2521-TE

SW30HRLE-400PR0C20TM720D-400RE2540-TE

BW30FR-400/34iESPA2-4040TM720D-440RE4040-TE

BW30XFRLE-400/34iESPA4-4040TML20N-400RE4040-TL

BW30LCHR-4040CPA3-LD-8040TML 20D-370ETC.

BW30-4040SWC5-8040TML20DA400


LCLE-4040YQS-8040TML20D-400


BW30HRLE-4040ESPA2-8040TMH10A


SW30-4040ESNA1-LF-LDTMG10D


BW30HR-380ESNA1-K1TM710D


SFP-2880CPA3-LDTML10D




{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}