Reverse Osmosis System LFRO-3 In The Textile Industry

Introduction

The Reverse Osmosis System LFRO - 3 is a state - of - the - art water treatment solution, engineered to meet the most demanding water purification requirements. It actively harnesses the power of reverse osmosis technology, applying pressure to force water through a semi - permeable membrane. This process enables the system to separate dissolved salts, heavy metals, bacteria, viruses, and other minute contaminants from water, ensuring the production of high - quality, purified water. Whether for industrial, commercial, or residential use, the LFRO - 3 is designed to deliver reliable and efficient water treatment.

Features

• High - Efficiency Filtration: Actively removes a vast array of contaminants, achieving an impressive level of water purity. It can effectively reduce the concentration of dissolved solids, making the water suitable for applications with strict quality standards.

• Customizable Configuration: The system allows for customization to suit specific needs. You can adjust parameters such as flow rate, pressure, and filtration capacity to match different water treatment demands, whether it's a small - scale home setup or a large - scale industrial operation.

• Automated Operation: Equipped with an intelligent control system, the LFRO - 3 manages various processes automatically. It can regulate water flow, pressure, and initiate self - cleaning cycles, minimizing the need for constant manual intervention and ensuring consistent performance.

• Low Maintenance Design: Constructed with durable components and an optimized design, the system requires minimal maintenance. This not only reduces downtime but also cuts down on associated costs, making it a cost - effective choice for long - term water treatment.

Suggested Operating Conditions

• Temperature: Operates optimally within the range of 5 - 45 °C. Temperatures outside this range can impact the membrane's performance, with lower temperatures reducing water permeability and higher temperatures potentially causing damage to the membrane material.

• Maximum Operating Pressure: Can withstand up to 4.1 MPa. Applying pressure beyond this limit may lead to membrane rupture or a significant decline in filtration efficiency.

• Feed Water Turbidity: The turbidity of the feed water should be ≤ 1 NTU. High turbidity can cause membrane fouling, which in turn shortens the membrane's lifespan and reduces the system's overall efficiency.

• Feed Water SDI (Silt Density Index): An SDI value of ≤ 5 is recommended. Higher SDI indicates a higher concentration of suspended solids in the feed water, which can foul the membrane and impede the system's performance.

• pH Range: Functions effectively in a pH range of 2 - 11. Extreme pH values can chemically attack the membrane, gradually degrading its performance over time.

Application

• Domestic Water Purification: Ideal for homes, the LFRO - 3 provides clean and safe drinking water. It eliminates impurities that can affect the taste, odor, and health aspects of water, ensuring high - quality water for daily consumption.

• Industrial Water Treatment: In industries such as electronics manufacturing, where ultra - pure water is crucial for producing high - precision components, the LFRO - 3 plays a vital role. In the pharmaceutical industry, it ensures the purity of water used in drug formulation and production, meeting the strictest quality control requirements.

• Brackish Water Desalination: Actively treats brackish water sources, removing salts and impurities to produce potable water. This is particularly valuable in regions with limited freshwater resources, such as arid areas or coastal regions with access to brackish groundwater.

• Water Recycling and Reuse: Treats secondary or tertiary treated wastewater, removing remaining dissolved solids, organic matter, and salts. The treated water can then be reused for non - potable applications like irrigation, industrial cooling, and toilet flushing, promoting water conservation.

 Technical Data

• Membrane Area: The system is equipped with a membrane area that allows for efficient water treatment. The specific area may vary depending on the model, but it's designed to handle a significant volume of water.

• Nominal Salt Rejection Rate: Typically achieves a salt rejection rate of around 99%, effectively removing dissolved salts from the water. However, this rate may vary slightly depending on operating conditions.

• Permeate Flow Rate: The permeate flow rate ranges from [X] to [Y] liters per hour or cubic meters per day, depending on factors such as system configuration, membrane type, and operating conditions. Higher flow rates are achievable under optimal conditions.

• Membrane Type: Utilizes high - quality Thin - Film Composite (TFC) membranes. TFC membranes are known for their excellent performance in rejecting contaminants and providing long - term durability, making them suitable for a wide range of water treatment applications.

• Drawing

• 

 Conclusion

In conclusion, the Reverse Osmosis System LFRO - 3 is a top - notch water treatment solution. Its advanced features, such as high - efficiency filtration, customizable configuration, and automated operation, make it a reliable choice for various applications. The well - defined operating conditions and clear technical data ensure consistent and efficient performance. Whether it's providing clean drinking water for households, supporting high - precision industrial processes, or contributing to water conservation through reuse, the LFRO - 3 plays a crucial role. As the demand for high - quality water treatment solutions continues to grow, the LFRO - 3 is well - positioned to meet these challenges, offering a cost - effective and efficient way to purify water and improve water quality.

• Other models

• Model	Flow Rate (m³/hr)	Raw Water Pump	Sand Filter Size (mm)	Carbon Filter Size (mm)	Anti-Scale Dosing System	Security Filter	High Pressure Pump	RO System
  LFRO-0.5	0.5	BW2-4 (0.55KW)	250×1400	250×1400	40L	3×20″	BL2-11 (1.1KW)	2×RO membrane 4040
  LFRO-1	1	BJZ100 (0.75KW)	300×1400	300×1400	40L	5×20″	BL2-13 (1.5KW)	4×RO membrane 4040
  LFRO-2	2	BJZ150 (1KW)	400×1650	400×1650	40L	5×20″	BL4-12 (2.2KW)	8×RO membrane 4040
  LFRO-3	3	CMF4-60 (1.1KW)	500×1750	500×1750	40L	5×40″	BL4-14 (3KW)	12×RO membrane 4040
  LFRO-4	4	CMF8-25 (1.5KW)	600×1900	600×1900	40L	5×40″	CDL8-12 (4KW)	4×RO membrane 8040
  LFRO-5	5	CMF8-30 (1.85KW)	750×1900	750×1900	60L	7×40″	CDL8-14 (5.5KW)	5×RO membrane 8040
  LFRO-6	6	CMF8-30 (1.85KW)	900×1900	900×1900	60L	7×40″	CDL8-14 (5.5KW)	6×RO membrane 8040
  LFRO-10	10	CMF16-30 (2.2KW)	1000×2200	1000×2200	60L	10×40″	CDL16-12 (11KW)	10×RO membrane 8040
  LFRO-15	15	CMF32-20 (4KW)	1200×2300	1200×2300	100L	15×40″	CDL32-80 (15KW)	15×RO membrane 8040
  LFRO-20	20	CMF45-20 (7.5KW)	1500×2400	1500×2400	100L	20×40″	CDL42-50 (18.5KW)	20×RO membrane 8040
  LFRO-25	25	CMF45-30 (11KW)	1800×2600	1800×2600	150L	25×40″	CDL42-60 (22KW)	25×RO membrane 8040
  LFRO-30	30	CMF64-20 (11KW)	2200×3400	2200×3400	200L	42×40″	CDL64-50 (30KW)	30×RO membrane 8040
  LFRO-40	40	CMF85-20 (15KW)	2600×3450	2600×3450	500L	52×40″	CDM85-50 (37KW)	40×RO membrane 8040
  LFRO-50	50	CMF85-30 (18.5KW)	3000×4500	3000×4500	500L	65×40″	CDM85-60 (45KW)	50×RO membrane 8040