Introduction
The LFRO - 30 Reverse Osmosis (RO) System sets a new standard for water purification efficiency, combining cutting - edge technology with rugged reliability. Engineered for industrial, commercial, and municipal applications, this system actively removes up to 99.5% of dissolved salts, heavy metals, and microorganisms from feed water. Its modular architecture supports scalable production from 30 to 300 m³/day, making it ideal for large - scale water treatment requirements. The LFRO - 30 features an energy - efficient design, intelligent controls, and corrosion - resistant components to ensure continuous operation in challenging environments.
Suggested Operating Conditions
| Parameter | Value | Notes |
|---|
| Temperature | 5 - 45°C | Optimal performance range |
| Max Pressure | 4.1 MPa (600 psi) | Maximum allowable pressure |
| Feed Turbidity | ≤ 1 NTU | Pre - treatment recommended |
| SDI | ≤ 5 | Silt Density Index limit |
| pH Range | 2 - 11 | Wide chemical compatibility |
| Maximum TDS | 5000 ppm | Brackish water capability |
Key Features
Pre - Filter: 5μm sediment filter removes particulates
Carbon Filter: Adsorbs chlorine, organic compounds, and odors
RO Membrane: TFC (Thin - Film Composite) technology for high rejection rates
Integral pressure exchanger reduces energy consumption by 30%
Operates at 0.5 - 0.8 kWh/m³, significantly lower than conventional systems
PLC - based automation with touchscreen interface
Real - time monitoring of flow, pressure, and water quality
Remote access via IoT connectivity for predictive maintenance
Fiberglass - reinforced polypropylene housing resists corrosion
Stainless steel fittings for long - term reliability
Modular design allows easy component replacement
Applications
Semiconductor Manufacturing: Produces ultrapure water with resistivity > 18 MΩ·cm
Pharmaceutical Industry: Meets USP purified water standards for drug formulation
Power Plants: Treats boiler feedwater to prevent scale formation and corrosion
Desalination: Converts brackish water (TDS < 5000 ppm) to potable water
Wastewater Reuse: Processes secondary effluent for irrigation and cooling systems
Emergency Response: Deployable system for disaster relief water supply
Beverage Production: Ensures water purity for bottled drinks and brewery operations
Hotels & Resorts: Provides purified water for swimming pools, spas, and food service
Agriculture: Treats irrigation water to reduce soil salinity and improve crop yields
Performance Advantages
High Salt Rejection: 99.5% nominal rate for consistent water quality
Low Operating Cost: 30% lower energy consumption compared to traditional RO systems
Compact Design: 40% smaller footprint than equivalent systems
Longevity: Membrane lifespan of 3 - 5 years with proper maintenance
Drawing
Technical Data
| Parameter | Value |
|---|
| Membrane Type | Thin - Film Composite |
| Membrane Area | 30 m² |
| Permeate Flow Rate | 30 - 300 m³/day |
| Recovery Rate | 75 - 85% |
| Dimensions | 2.5m (L) × 1.5m (W) × 2m (H) |
| Weight | 800 kg |
Maintenance & Service
Monthly Check: Inspect pressure gauges and replace pre - filters
Chemical Cleaning: Every 3 - 6 months depending on feed water quality
Membrane Replacement: When salt rejection drops below 97%
24/7 technical assistance via phone and online portal
On - site maintenance by certified technicians
Spare parts availability within 48 hours globally
Compliance & Certifications
ISO 9001:2015 Quality Management System
NSF/ANSI 61: Certified for drinking water components
CE Mark: Compliant with EU safety and environmental standards
RoHS: Restriction of hazardous substances
Other models
| Model | Flow Rate (m³/hr) | Raw Water Pump | Sand Filter Size (mm) | Carbon Filter Size (mm) | Anti-Scale Dosing System | Security Filter | High Pressure Pump | RO System |
|---|
| LFRO-0.5 | 0.5 | BW2-4 (0.55KW) | 250×1400 | 250×1400 | 40L | 3×20″ | BL2-11 (1.1KW) | 2×RO membrane 4040 |
| LFRO-1 | 1 | BJZ100 (0.75KW) | 300×1400 | 300×1400 | 40L | 5×20″ | BL2-13 (1.5KW) | 4×RO membrane 4040 |
| LFRO-2 | 2 | BJZ150 (1KW) | 400×1650 | 400×1650 | 40L | 5×20″ | BL4-12 (2.2KW) | 8×RO membrane 4040 |
| LFRO-3 | 3 | CMF4-60 (1.1KW) | 500×1750 | 500×1750 | 40L | 5×40″ | BL4-14 (3KW) | 12×RO membrane 4040 |
| LFRO-4 | 4 | CMF8-25 (1.5KW) | 600×1900 | 600×1900 | 40L | 5×40″ | CDL8-12 (4KW) | 4×RO membrane 8040 |
| LFRO-5 | 5 | CMF8-30 (1.85KW) | 750×1900 | 750×1900 | 60L | 7×40″ | CDL8-14 (5.5KW) | 5×RO membrane 8040 |
| LFRO-6 | 6 | CMF8-30 (1.85KW) | 900×1900 | 900×1900 | 60L | 7×40″ | CDL8-14 (5.5KW) | 6×RO membrane 8040 |
| LFRO-10 | 10 | CMF16-30 (2.2KW) | 1000×2200 | 1000×2200 | 60L | 10×40″ | CDL16-12 (11KW) | 10×RO membrane 8040 |
| LFRO-15 | 15 | CMF32-20 (4KW) | 1200×2300 | 1200×2300 | 100L | 15×40″ | CDL32-80 (15KW) | 15×RO membrane 8040 |
| LFRO-20 | 20 | CMF45-20 (7.5KW) | 1500×2400 | 1500×2400 | 100L | 20×40″ | CDL42-50 (18.5KW) | 20×RO membrane 8040 |
| LFRO-25 | 25 | CMF45-30 (11KW) | 1800×2600 | 1800×2600 | 150L | 25×40″ | CDL42-60 (22KW) | 25×RO membrane 8040 |
| LFRO-30 | 30 | CMF64-20 (11KW) | 2200×3400 | 2200×3400 | 200L | 42×40″ | CDL64-50 (30KW) | 30×RO membrane 8040 |
| LFRO-40 | 40 | CMF85-20 (15KW) | 2600×3450 | 2600×3450 | 500L | 52×40″ | CDM85-50 (37KW) | 40×RO membrane 8040 |
| LFRO-50 | 50 | CMF85-30 (18.5KW) | 3000×4500 | 3000×4500 | 500L | 65×40″ | CDM85-60 (45KW) | 50×RO membrane 8040 |
Conclusion
The LFRO - 30 Reverse Osmosis System delivers uncompromising performance for water purification in critical applications. Its combination of high efficiency, durability, and smart technology ensures reliable operation while reducing operational costs. Whether for industrial processes, municipal water supply, or commercial use, the LFRO - 30 sets the benchmark for water treatment excellence.
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
