Introduction
The LFRO - 50 Reverse Osmosis System is engineered to deliver superior water purification for industrial, commercial, and municipal applications. By combining advanced TFC membrane technology with intelligent controls, this system actively removes up to 99.5% of dissolved salts, heavy metals, and microorganisms from feed water. Its modular design allows scalable production from 50 to 500 m³/day, making it ideal for large - scale water treatment needs. The LFRO - 50 features an energy - efficient design, intelligent controls, and corrosion - resistant components to ensure continuous operation in challenging environments.
Features
Triple - Stage Filtration: Pre - filter (5μm), carbon filter, and RO membrane work sequentially to ensure thorough purification.
Energy Recovery: Integral pressure exchanger reduces energy consumption by 30%.
Smart Control: PLC - based system with touchscreen interface and remote monitoring capabilities.
Corrosion Resistance: Constructed with fiberglass - reinforced polypropylene housing for durability.
Suggested Operating Conditions
| Parameter | Value | Notes |
|---|
| Temperature | 5 - 45°C | Optimal performance range |
| Max Pressure | 4.1 MPa (600 psi) | Maximum allowable pressure |
| Feed Turbidity | ≤ 1 NTU | Pre - treatment recommended |
| SDI | ≤ 5 | Silt Density Index limit |
| pH Range | 2 - 11 | Wide chemical compatibility |
| Maximum TDS | 5000 ppm | Brackish water capability |
Applications
Industrial Water
Semiconductor Plants: Produces ultrapure water with resistivity > 18 MΩ·cm.
Pharmaceutical Manufacturing: Meets USP purified water standards for drug formulation.
Power Generation: Treats boiler feedwater to prevent scale formation.
Municipal Use
Desalination: Converts brackish water (TDS < 5000 ppm) to potable water.
Wastewater Reuse: Processes secondary effluent for non - potable applications.
Emergency Response: Deployable system for disaster relief water supply.
Commercial Sector
Beverage Production: Filters water for bottled drinks and brewery operations.
Hotels & Resorts: Provides purified water for swimming pools and spas.
Agriculture: Treats irrigation water to reduce soil salinity.
Technical Data
| Parameter | Value |
|---|
| Membrane Type | Thin - Film Composite |
| Membrane Area | 50 m² |
| Permeate Flow Rate | 50 - 500 m³/day |
| Recovery Rate | 75 - 85% |
| Dimensions | 3m (L) × 1.8m (W) × 2.2m (H) |
| Weight | 1200 kg |
Drawing
Other model
| Model | Flow Rate (m³/hr) | Raw Water Pump | Sand Filter Size (mm) | Carbon Filter Size (mm) | Anti-Scale Dosing System | Security Filter | High Pressure Pump | RO System |
|---|
| LFRO-0.5 | 0.5 | BW2-4 (0.55KW) | 250×1400 | 250×1400 | 40L | 3×20″ | BL2-11 (1.1KW) | 2×RO membrane 4040 |
| LFRO-1 | 1 | BJZ100 (0.75KW) | 300×1400 | 300×1400 | 40L | 5×20″ | BL2-13 (1.5KW) | 4×RO membrane 4040 |
| LFRO-2 | 2 | BJZ150 (1KW) | 400×1650 | 400×1650 | 40L | 5×20″ | BL4-12 (2.2KW) | 8×RO membrane 4040 |
| LFRO-3 | 3 | CMF4-60 (1.1KW) | 500×1750 | 500×1750 | 40L | 5×40″ | BL4-14 (3KW) | 12×RO membrane 4040 |
| LFRO-4 | 4 | CMF8-25 (1.5KW) | 600×1900 | 600×1900 | 40L | 5×40″ | CDL8-12 (4KW) | 4×RO membrane 8040 |
| LFRO-5 | 5 | CMF8-30 (1.85KW) | 750×1900 | 750×1900 | 60L | 7×40″ | CDL8-14 (5.5KW) | 5×RO membrane 8040 |
| LFRO-6 | 6 | CMF8-30 (1.85KW) | 900×1900 | 900×1900 | 60L | 7×40″ | CDL8-14 (5.5KW) | 6×RO membrane 8040 |
| LFRO-10 | 10 | CMF16-30 (2.2KW) | 1000×2200 | 1000×2200 | 60L | 10×40″ | CDL16-12 (11KW) | 10×RO membrane 8040 |
| LFRO-15 | 15 | CMF32-20 (4KW) | 1200×2300 | 1200×2300 | 100L | 15×40″ | CDL32-80 (15KW) | 15×RO membrane 8040 |
| LFRO-20 | 20 | CMF45-20 (7.5KW) | 1500×2400 | 1500×2400 | 100L | 20×40″ | CDL42-50 (18.5KW) | 20×RO membrane 8040 |
| LFRO-25 | 25 | CMF45-30 (11KW) | 1800×2600 | 1800×2600 | 150L | 25×40″ | CDL42-60 (22KW) | 25×RO membrane 8040 |
| LFRO-30 | 30 | CMF64-20 (11KW) | 2200×3400 | 2200×3400 | 200L | 42×40″ | CDL64-50 (30KW) | 30×RO membrane 8040 |
| LFRO-40 | 40 | CMF85-20 (15KW) | 2600×3450 | 2600×3450 | 500L | 52×40″ | CDM85-50 (37KW) | 40×RO membrane 8040 |
| LFRO-50 | 50 | CMF85-30 (18.5KW) | 3000×4500 | 3000×4500 | 500L | 65×40″ | CDM85-60 (45KW) | 50×RO membrane 8040 |
Conclusion
The LFRO - 50 Reverse Osmosis System sets a new standard for water purification efficiency, combining cutting - edge technology with rugged reliability. Its modular architecture, high salt rejection rate, and energy - saving design make it suitable for diverse applications. Whether purifying water for industrial processes, municipal supply, or commercial use, the LFRO - 50 ensures consistent performance and compliance with the highest quality standards. Backed by advanced engineering and user - friendly controls, this system is the optimal choice for organizations seeking sustainable water treatment solutions.
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
