Position: Home > Product > Filter Element > Water Filter Element >

Product Category

Oil Purification products

Air Compressor Filter

Air Compressor Inline Filter

Water purification equipment

Air Purification Products

Contact Us

Tel:+86-373-2618077
Fax:+86-373-3339377
E-mail:overseas@lefilter.com
Add:Lefilter Mansion,No. 12 Hongli Road,Muye District,Xinxiang City,Henan Province,China

Domestic Sewage for waster water

Read Reviews23 Q&As Write a Review
Equipment Introduction: This Belt Filter Press is used for soild liquid separation process, particularly the sludge dewatering in chemical industry, paper mill, printing and dyeing mill, mining and water treatment field. Dewatering process

PARAMETER

Brand Name: Lefilter
Model Number: hc9600fkp13h
Nominal filtration rating:
Application:waste water treatment
Operating pressure:
Working temperature: 0-80
Replacement or not:Replacement

Equipment Introduction:

· This Belt Filter Press is used for soild & liquid separation process, particularly the sludge dewatering in chemical industry, paper mill, printing and dyeing mill, mining and water treatment field. 
 
· Dewatering process is primarily obtained by passing a pair of filtering cloths and belt through a system of rollers,the system takes sludge or slurry as a feed ,and separates it into a filtrate and a soild cake.
 
Application:

It's a essential equipment in aeration basin, it utilize fine or medium bubbles diffuse to provide aeration and mixing to process water, and widely used in many places, such as :
* municipal sewage treatment plant 
* industrial wastewater treatment plant
* paper mill wastewater treatment
* petroleum industrial wastewater treatment plant.
* chemical industrial wastewater treatment plant etc.

Product advantage:

· Automatic control and continuous working;
· Low energy cost and long service life;
· High dewatering efficiency and high solid containing rate of mud cake;
· Easy maintenance and management;
· Low noise and less chemicals;
· Lower Maintenance Cost;
· Economical and reliable, wide application
 
Working Principle:

·  Belt Filter Press is a Biosolids/sludge dewatering device, that applies mechanical pressure to a chemically conditioned slurry;
· Slurry is sandwiched between two tensioned belts, by passing those belts through a serpentine of decreasing diameter rolls. The machine can actually be divided into three zones: gravity zone, where free draining water is drained   by gravity through a porous belt; wedge zone, where the solids are prepared for pressure application; and pressure     zone, where medium, then high pressure is applied to the conditioned solids.
· Typically, a belt filter press receives a slurry ranging from 1-4% feed solids and produces a final product of 25% cake solids. Performance depends on the nature of the solids being processed.


CONTACT US
NEWSLETTER
Яндекс.Метрика