MFNP060-60N-High flow PP pleated membrane water filter

MFNP060-60N-High flow PP pleated membrane water filter introduction

High flow industrial water filter is put into water filter housing, uses deep fine polypropylene or glass fiber membrane as the filter material. It has a large diameter of 6 inches / 152mm, no central rod, one-way opening, and specially designed inside-to-outside filter direction to ensure all pollution. The particles are trapped inside the filter element. The ultra-large flow design significantly reduces the amount of filter cartridges and filter housing , greatly reducing equipment input costs and labor costs.

 

MFNP060-60N-High flow PP pleated membrane water filter Features:

[ High filtration area, large flux]

The filter element has a large effective filtration area, low pressure drop and large flow.

[ Large dirt holding capacity and long life]

The deep fine membrane material is used to scientifically design the multi-layer gradient pore filter structure, which makes the filter element have the characteristics of high dirt concentration, thereby prolonging the service life of the filter element and saving the user cost.

[A variety of specifications can be selected]

A wide range of filtration accuracy from 0.5μm to 100μm is available to meet different filtration levels. The length specifications can be selected from 20", 40", and 60".

 

High flow industrial water filter in water filter machine Product Specifications:

Product Size

[Outer diameter]: Ø 152mm

[length]: 20 ”, 40 ”, 60 ”

Structural materials

[ Filter media ]: PP / glass fiber

[Shell/Center Rod/End Cover]: PP

[ Sealing material ]: silicone rubber, ethylene propylene rubber, fluoro rubber, Teflon fluoro rubber

Technical performance

[Maximum operating temperature]: 80 ° C

[Maximum working pressure difference]: 3 bar@ 21°C

High flow industrial water filter in water filter machine Dimensions

Types	High flow Water Filter
Filter Media	Polypropylene, Fiberglass, Polyester, Nylon
Support	Polypropylene
End Caps	10% glass fiber reinforced polypropylene
Center Core(60” length only)	Polypropylene
Filter Grades	1.5,3,4,5,10,20,30,70 micron
O-ring Options	NBR, EPDM, Viton
Cartridge Length	20”, 40”, 60”
Cartridge max OD	6”

3M

Micron	1μm,5μm,10μm,15μm,20μm,40μm,70μm,100μm
Cartridge Length:	20" (508mm) /40" (1016mm)/60" (1524mm)
Cartridge Max.OD:	6.5"(165mm)/6"(152mm)
Filter Medium:	Polypropylene ,  Cellulose , Melt Blown PP
Support:	Polypropylene
End Caps:	Glass Fiber Reinforced Polypropylene
O-ring Seal options:	EPDM,NBR,Viton
Polypropylene:	3.44bar@82°C,50psi@180°F
Glass Fiber:	3.44bar@121°C,50psi@180°F
Suggestion Flow:	20" 660LPM
	40" 1300LPM
	60" 1900LPM

 

Parke

Micron	1μm,5μm,10μm,15μm,20μm,40μm,70μm,100μm
Cartridge Length:	40" (1016mm)
Cartridge Max.OD:	6.0"(152mm)
Filter Medium:	Polypropylene , Cellulose , Melt Blown PP
Support:	Polypropylene
End Caps:	Glass Fiber Reinforced Polypropylene
O-ring Seal options:	EPDM,NBR,Viton,
Polypropylene:	3.44bar@82°C,50psi@180°F
Glass Fiber:	3.44bar@121°C,50psi@180°F
Suggestion Flow:	40" 1300LPM

 

PAL

OD	6” (152mm)
Length	20"/40"/60"
Micron	0.1um~100 um
Maximum operating temperature	Pleated/melt-blown pp: 82℃
	Pleated glass fiber: 121℃
Maximum operating differential pressure	Pleated/melt-blown pp: 3.44bar@82℃
	Pleated glass fiber: 3.44bar@121℃
Suggestion design flow	40": ≤15m3/h
	60": ≤25m3/h

 

MFNP060-60N-High flow PP pleated membrane water filter Features and Benefits:

1) All Polypropylene construction.

2) 98% retention ratings from .5 to 70 microns.

3) Heavy-duty outer cage replaces costly stainless steel support basket.

4) Handle provides fast and easy push/pull installation.

5) O-ring seal on cartridge eliminates bypass.

6) Inside out flow retains contaminant during change out.

7) Multi-layer pleated media designed for high flow and long service life.

8) Thermally bonded construction.

9) Retrofits competitive high flow filter housings.

10) Gauge ports standard.

Production Process

Packing & Delivery

Contact:
Attn: Ada 
Email: filtersales03@le-filter.com