Oil Purification products
Air Compressor Filter
Air Compressor Inline Filter
Water purification equipment
Air Purification Products
Brand Name: P-all
Model Number: HFU640GF060H13
Nominal filtration rating:10微米
Application:Sewage treatment;agricultural irrigation
Operating pressure:
Working temperature:
Replacement or not:Replacement
Here are some ways to extend the service life of high-flow filter elements:
1. Correct installation
Before installing a high-flow filter element, make sure the inside of the filter is clean and free of impurities, dust, and residual liquid. Otherwise, these contaminants may damage the filter element when it starts working.
Strictly follow the installation instructions of the filter element to ensure that the filter element is installed correctly and firmly. For example, make sure that the seal of the filter element is installed in place to prevent leakage during the filtration process, because leakage will not only affect the filtration effect, but also allow unfiltered media to directly impact the filter element, shortening its service life.
2. Optimize operating conditions
Control flow and pressure
Avoid operating beyond the rated flow and pressure range of the filter element. If the flow is too large, it will increase the load on the filter element and cause the filter element to clog faster; while excessive pressure may cause damage to the filter element structure. The flow and pressure of the system should be reasonably adjusted according to the specifications and actual needs of the filter element to ensure that it operates within a safe range.
Install flow and pressure monitoring devices to monitor the operating status of the filtration system in real time. Once abnormal flow or pressure is found, take timely measures to adjust it to prevent damage to the filter element.
Stabilize operating temperature
Ensure that the filtration system operates within a suitable temperature range. Too high or too low temperature may affect the performance and life of the filter element. For some temperature-sensitive filter element materials, such as some polymer materials, too high temperature may cause them to deform, soften or even damage; too low temperature may make the filter element brittle and reduce its mechanical strength.
If the filtration system operates in an environment with large temperature changes, you can consider taking insulation or cooling measures to stabilize the operating temperature. For example, in a high temperature environment, you can install an insulation layer for the filter; in a low temperature environment, you can use a heating device to prevent the filter element from freezing.
3. Do a good job of pretreatment
Set up a suitable pretreatment device before the large flow filter element, such as a prefilter, precipitator or chemical treatment equipment. The prefilter can remove larger particles of impurities, reduce the burden of the large flow filter element, and extend its service life.
For media containing corrosive substances or high concentrations of impurities, chemical pretreatment can be performed, such as adding corrosion inhibitors, flocculants, etc., to reduce the damage of the medium to the filter element.
4. Regular maintenance and cleaning
Develop a regular maintenance plan, including checking the working status of the filter element, cleaning the filter housing, etc. Regular inspection can timely discover problems with the filter element, such as blockage, breakage, etc., so that appropriate measures can be taken to deal with them.
Choose a suitable cleaning method according to the use of the filter element and the characteristics of the medium. For some washable large-flow filter elements, backwashing, ultrasonic cleaning and other methods can be used to clean them to remove impurities on the filter element and restore its filtering performance. However, it should be noted that the number of cleanings should not be too many to avoid damaging the filter element structure.
When cleaning or replacing the filter element, pay attention to the operating specifications to avoid man-made damage to the filter element. At the same time, damaged seals and other accessories should be replaced in time to ensure the sealing and reliability of the filtration system.
V. Reasonable storage
When the large-flow filter element is not in use temporarily, it should be stored reasonably. Store the filter element in a dry, clean, well-ventilated environment, avoid direct sunlight and humid environment.
Before storage, the filter element can be properly cleaned and dried, and then packaged with sealed bags or packaging materials to prevent dust and impurities from entering.
For filter elements that are stored for a long time, their status should be checked regularly, and if necessary, they can be repackaged or other protective measures can be taken.
FAQ:
FAQ:
1. Question: Are you a trading company or a manufacturer?
A:We are a professional manufacturer of all kinds of filter cartridges, housings, and filtration systems. We provide you with the total filtration solutions with our years of industry experience.
2. Question: Can we undertake EPC projects
A: Of course, we are a mature company in all aspects, and our aim is to provide one-stop services without any intermediate links.
3. Q: Can you make customized products?
A: Yes, of course, if you can provide us with detailed specifications or drawings. Our mission is to make customers ideas on the products and provide the customer satisfied solutions.
4. Question: Can you provide accessories for the corresponding equipment?
A: Yes, we have complete equipment and spare parts
5. Q: Can I use our own designed package?
A: Yes, size, color, logo, and packaging style all can be customized.
6.Q: What's your MOQ?
A: Normally, equipment 1 set. please feel free to contact us so that we can make some shipping recommendations for you to save the cost based on the quantity you need.
7.Q: I am a small business owner, Can I buy from you?
A: Yes, you are warmly welcomed. To grow with our customers is our goal. We would like to grow with you together.
8. Q: What is your general lead time?
A: For equipment normally 25-30 working days .
9. Question: How should I make the payment?
A: A: We strongly recommend T/T, L/C are acceptable.
10.Question: What services can you provide if there are after-sales problems with the equipment
A: Our dedicated personnel will solve all after-sales problems you encounter 24 hours a day