PECO filter element oil and water coalescer equivalent of CAA Series 5

1.Brief introduction

Lefilter manufacture the equivalent of Facet CAA Series 5 coalescer cartridges offer the finest performance available.This standard
line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from jet fuel.
The Facet coalescer separator housings equipped with CAA Series 5 coalescer and companion separator cartridges have been
tested and fully qualified to meet the performance requirements to EI 1581, Fifth Edition, Category C (Category C replaces the
previous class A,B, and C of API 1581 3rd Edition.)Built for balanced fluid flow-thru and structural strength, each CAA Series 5
coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats,
wrapped around a coated, perforated metal center tube—all encased in an outer sock material. All are 6” OD (152 mm) by 31∕2"
ID (89mm) and available in standard interchangeable nominal lengths from 111∕4" (290 mm) to 571∕4" (1450 mm). The CAA Series 5
coalescer cartridges are available in two cartridge mounting styles:
self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection
molded,glass-filled nylon.This screw base material offers superior strength and ease of maintenance-uniform threads,no shrinkage,
no galling and no gasket to recover.
A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal.It will not
separate from the cartridge during installation or change out.

 

2.Standard Design Features

• Tested and qualified to the Fifth Edition of EI 1581, Category C
• Multi-layered media for increased solids holding capacity • Ultra-fine solids removal
• Maximum water coalescence
• Balanced cartridge flow characteristics
 • Recommended maximum operating temperature: 240°F (115oC)
• Withstands in excess of 75 psi differential pressure
 • pH range from 5 to 9 • Screw base or open-end configuration

3.Material

 • All metal components are treated against corrosion
• Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
• Buna-N gaskets—other materials are available on request

4.Data Sheet

MODEL NUMBER	NOMINAL LENGTH (IN)	NOMINAL LENGTH (MM)	OUTSIDE DIAMETER OD (IN)	INSIDE DIAMETER ID (IN)	MOUNTING STYLE
CAA11-5	111∕4	290	6	31∕2	Rod
CAA14-5	141∕2	370	6	31∕2	Rod
CAA14-5SB	15	380	6	31∕2	Screw Base
CAA22-5	221∕4	560	6	31∕2	Rod
CAA22-5SB	23	580	6	31∕2	Screw Base
CAA28-5	283∕4	730	6	31∕2	Rod
CAA28-5SB	29	740	6	31∕2	Screw Base
CAA33-5	331∕4	840	6	31∕2	Rod
CAA33-5SB	34	860	6	31∕2	Screw Base
CAA38-5	38	960	6	31∕2	Rod
CAA38-5SB	39	990	6	31∕2	Screw Base
CAA43-5	431∕4	1100	6	31∕2	Rod
CAA43-5SB	45	1140	6	31∕2	Screw Base
CAA56-5	561∕4	1430	6	31∕2	Rod
CAA56-5SB	57	1450	6	31∕2	Screw Base

For more details,contact us at any time,please.