CUF single machine bag dust collector

Brief Introduction of CUF Single Bag Filter

1, CUF single bag filter overview
Compared with other domestic single-bag filter, CUF single bag filter is economical and practical, simple and compact, easy to install and easy to maintain (internal filter type). It is mainly used for various tops, bottoms, tops and types of conveyors. Equipment such as dust collectors for dust and dust emission points. The UF single bag filter group adopts a polyester cloth bag feeding bag, the inlet gas temperature is less than 120 degrees, the inlet gas dust concentration is 100 g/m3, and the outlet gas dust concentration meets the national discharge standard.


2, Working principle of the CUF single bag filter
CUF single bag filter is dust-containing gas from the air inlet into the hopper or through the flower plate hole into the filter bag. Dust-laden gas passes through the dust filter bag into a net gas, enters the tank, and is discharged by the fan through the upper discharge port of the tank. The dust accumulation is attached to the inner surface of the dust filter bag and continuously increases, so that the resistance of the bag dust collector is continuously increased. When the resistance rises to about 1500 Pa, the dust on the filter bag needs to be periodically removed in order to allow the bag filter to continue working. When clearing ash, it is preferred to close the top fan and start the motor. Since the eccentric motor acts on the rocking motor, the connecting rod is driven to rotate the rocking shaft back and forth. The dust filter bag is in a corrugated state, which causes the dust to fall. When the dust is removed, the electric motor stops shaking and the fan is restarted to restart the bag filter. The above actions are automatically controlled by the controller.

Contact at:
E-mail:filtersales03@le-filter.com