The TXP type ceramic cyclone is a new type of cyclone duster designed and developed on the basis of a variety of cyclone dust remover, which adopts the highest optimal coefficient structure of Steinman. The internal and external shells and components are built with ceramic tube blocks to ensure the wear resistance. Not only the service life is guaranteed, but the amount of steel is reduced, and the cost of the equipment and maintenance and maintenance is reduced. The problem of the wear of the cyclone dust collector is solved.
Mechanism of dust removal
The TXP type ceramic cyclone dust collector uses the effect of the peak velocity distribution in the cyclone on the rise of the flue gas, and sets up the ascending and two separation chambers and the intermediate exhaust pipes. The smoke is separated from the inlet with a design speed swirling flow into the cylinder, and the dust is separated by the centrifugal effect. The dust separated by the upper and lower parts is settled down the cylinder to the ash trough; the flue gas rises along the 0.6 cylinder diameter at the peak velocity of the swirling flow, and the gas with a high concentration of dust is swirling into the two separation chamber along the wall of the rising cylinder, and then through the bypass duct. Back to the cone, the two separated dust drops to the cone bottom sink, and the separated dust goes into the ash bin. The two flue gas separated from the middle exhaust pipe is discharged from the outlet. Because the rising swirling speed of the rising cylinder is much higher than that of the main cylinder, the dust can be effectively separated for the two time. The overall efficiency of dust removal is greatly improved.
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
{sval:sql sql='SELECT n_parameter FROM dede_addonarticle WHERE aid = ~aid~ ' } {/sval:sql}
