With the increasing of the filtering time, the dust attached on the outer surface of the filter bag increases and the filter bag resistance increases correspondingly, which affects the effect of dust removal. Dust in the dust container (drawer) is removed manually.
1. Fan parts adopt foreign centrifugal fan, large air volume, high wind pressure, rigid fan characteristic curve, and noise elimination measures.
2, the filter part is a flat cloth filter with industrial polyester fabric as filter material, and the cloth bag is equipped with a spring wire mesh. The filter effect is good, the filter bag is easy to replace and the service life is long.
3. The dust removal mechanism of filter parts is driven by an electric motor to drive the eccentric wheel, and the connecting rod causes the cloth bag to shake to remove dust from the outer surface of the filter bag. The control device is divided into two kinds: self control and hand control. Self control means that in the continuous work of the fan, the ash clearing mechanism automatically vibrates the ash regularly, and the hand control that the cleaning mechanism automatically works after the fan stops, automatically stops after dozens of seconds, and can start the ash cleaning motor at any time according to the needs, and the time of ash clearing is adjusted by the user to adjust the time relay.
4. The filter parts are equipped with fast and dismant repair doors that are loose and sealed, so that they can be repaired and removed when necessary.
5. The air inlet interface on the upper side of the dust collector can be folded when needed, so as to increase the use of the inlet area.
6, the unit has sixteen specifications, divided into A and B two. A type drawer drawer, B type no ash drawer. The lower flange is added, and the dust is directly collected on the dusting equipment, such as the dumping mouth of the bale silo, the mixing storage, the sandbox, the belt conveyance and other equipment, and the dust is directly recovered by the user.
