In recent years, the market demand for sand and gravel aggregates has continued to increase. While satisfying the development of urban construction, it has also brought many environmental problems. Due to its own characteristics, dust can easily cause dust explosion. At the same time, workers who have been exposed to dust for a long time are more likely to suffer from pneumoconiosis. So what should we do?

The difficulty of mining machinery processing is mainly to control the dust escape. Use the mine baghouse dust collector to vacuum the dust, so that a negative pressure state is formed inside the crusher. The air pressure difference inside and outside the crusher causes the airflow to enter the crusher from the outside through the gap on the crusher and the conveying channel. , The dust-laden airflow formed by the mixing of the moving air flow and a large amount of dust generated by the crusher is sucked into the dust collector, and after being purified by the dust collector, the clean air is discharged.

Working principle of mine baghouse dust collector

The mine baghouse dust collector is composed of an upper box, a middle box, an ash bucket, a bracket, a filter bag assembly, a back-flushing ash cleaning mechanism, and an ash discharge valve. It adopts the design concept of large air volume and low wind speed.

When the dust-laden gas enters the ash hopper from the air inlet pipe at the lower part of the dust collector through the deflector, the coarse dust falls into the ash hopper due to the collision of the deflector and the reduction of the gas velocity.

The remaining fine particles of dust enter the filter bag room with the gas. Due to the inertia, diffusion, etc. of the filter material fibers and fabrics, the dust is retained outside the filter bag, and the purified gas escapes from the bag and is discharged through the exhaust pipe.

Equipment performance advantage

• Reinforced ash cleaning: The pulse injection device is used, which has a strong ash cleaning ability. Under the injection pressure of 0.2-0.3MPa, all kinds of dust with strong adhesion can obtain a good ash cleaning effect.

• Low equipment resistance: The running resistance can be stabilized in the range of 900-1500Pa for a long time, which is significantly lower than other types of baghouse dust collector.

• High dust removal efficiency: under normal circumstances, the dust concentration is lower than 50mg/Nm3, and in some occasions with special requirements, it can be lower than 10mg/Nm3.

• Easy to change the bag: The elastic expansion ring at the mouth of the filter bag is embedded with the hole of the flower plate.

• Online/offline cleaning method: According to the operating conditions and user requirements, the equipment can realize two different methods of online cleaning or offline cleaning.

Lefilter has helped many mining companies to complete environmental protection upgrades. If you are also facing such a problem, you can contact us at any time, and Lefilter will provide you with customized solutions!