The pleated filter element is made of polyester fiber cloth. Polyester fiber has good mechanical properties and high temperature resistance, and its strength will not be affected in strong acid environment. It is not suitable for use in hot alkali environment. The overall injection molding ensures the sealing of both ends, and the folding process design makes the filter element have the characteristics of large filtration area, large flux and long service life, thereby reducing the replacement cycle of the filter element and reducing the investment cost of filtration.
Features
Folding process design, large filtration area
High throughput, low dropout pressure, extended service life
It can be cleaned on the surface and used many times to reduce the cost
A variety of lengths and outer diameters are available for strong applicability
Application field
swimming pool water filtration
RO security filter
routine water purification
Product specification
OD 68mm, 115mm
inner diameter 28mm
Length 9.75",9.87",10",20",30",40"
Filter material Polyester fiber, polypropylene (PP
End Caps Plastisol
Center pole Polypropylene (PP)
Maximum operating temperature 37.8°C
Maximum operating pressure 4.0Bar Depending on the pore size, the flow rate per 10” filter element is between 3-10 GPM
Other Related Products
