Introduction

The coalescing dehydration oil filter machine has a total of five-stage filtration system, which integrates two functions of precision filtration and high-efficiency dehydration. The "coalescence separation" technology introduced from the United States is used for dehydration, with high dehydration efficiency and strong capacity, especially suitable for the treatment of oil A large amount of water is separated, which is far better than the dehydration ability of centrifugation, and can break all the oil-water emulsification structure in the medium; through the filtration of the particle filtration system, the cleanliness of the medium can be stably controlled at the state required by the system to ensure oil The cleanliness of the fluid; does not change the physical and chemical properties of the oil, prolonging the service life of the oil; low energy consumption, low operating costs; excellent system configuration, strong continuous working performance, suitable for online operation.

Application

filter new oil, fill new oil and filter, purify the oil in use, bypass filtration when the hydraulic lubrication system is working.

Equipment performance

Particulate Filter System: High-efficiency filter media filter, large filtration area design, which can effectively filter out impurities in very fine particles, so that the oil reached a high of cleanliness.

 Coalescingsystem: Coalescing system consists of a set consisting of coalescing filter, which uses a unique polar molecular structure, oil free water and emulsified water through the filter after being coalesce into larger droplets,and then rely on gravity role sinking down to the water storage tank.

 Separation System: Separation filter in the separation system is made by special hydrophobic material, when the oil through the filter, the waterdroplets are blocked in the outer surface of the filter, coalescing with each other by gravity until settlement to the water storage tank.

 Drainage System: Separated water is stored in the water storage tank, when theheight of the interface to reach the set value, the valve opens and the water discharges, until reduced to below the liquid surface, then the valve closed and the drainage stopped.

Technical principle

Different liquids have different surface tensions. And when the liquid flows through the hole. The lower the surface tension. The faster it passes through. When different mixed liquids flow into the separator. First enter the coalescence filter. The coalesced filter element has a multi-layer filter medium, and its pore size increases layer by layer. Due to the difference in surface tension, the oil passes through the filter quickly, while the water is much slower. And because the coalescence filter element uses hydrophilic material, the tiny water droplets are adsorbed on the surface of the filter layer, resulting in the coalescence of water droplets. Driven by kinetic energy, small droplets race through the opening. Gradually coalesce into large droplets. And under the action of gravity settling and separating from the oil. Through the oil after coalescing the filter element, there are still small water droplets moving forward to the separation of the filter element under the action of inertia. The separation filter is made of a special hydrophobic material, and when the oil passes through the separation filter, the water droplets are kept out of the separation filter. The oil is discharged from the outlet through a separating filter.

Model 

LYC-50J-*/**

Rated flow(L/min) 50 

Temperature (°C) 25-80

Recommended viscosity(CSt) 10-120

Rated pressure(MPa) 0.6

The original pressure loss(MPa) ≤0.01

Filtration precision before pump(μm) 100

First precision filtration accuracy(μm) 10、20、40

Secondary precision filtration accuracy(μm) 3、5、10

Voltage(V) AC 380V Three-phase power

Motor Power(kw)   1.1  

Weight(kg)  200 

Dimensions(mm) 1350*820*1400

Product Details

Other Related Products

ZLYC Series Efficient Vacuum Oil Purifier

LYC-C box-type mobile oil purifie

LPFC P-all Oil Filter