Large flow folding filter, 6 inches outer diameter, 40 inches up flow filter, single flow up to 45 m3/h, filter area of 7.8m2, and can replace similar imported products, large flow folding filter large diameter design, increase the filter area, reduce the nμmber of filter, reduce the shell size, prolong the service life, reduce the replacement frequency and installation cost. The filtration method of inside and out, so that all the impurities are intercepted in the inside of the filter element, no metal skeleton, greatly reduces the loss caused by discarding.
According to different application requirements, there are inner skeleton, outer skeleton and large flow filter elements with internal and outer skeleton, which can adapt to the different flow direction of filter mediμm. At the same time, the ordinary large flow filter filter material is generally five folding, but some special occasions, both require filter to have very large pollution, and have a very high filter accuracy, but also meet the large flow, then need special custom, increase the filter layer, can customize production 5-15 layers of large flow core, meet the needs of the special occasions.
Technical specification of high-flow folding filter element:
Outer diameter: 80mm, 130mm length: 10 " (including interface total length of about 260mm)
Outer diameter: 152mm (6 ") length: 10", 20 ", 30", 40"
Filter accuracy of large-flow folding filter element:
PP: 0.1μm，0.22μm，0.45μm，1μm，3μm，5μm，10μm ，30μm，50μm，100μm，150μm
PES:0.22μm，0.45μm，1.2μm
Hydrophobic PTFE:0.22μm,0.5μm, 1μm, 3μm, 10μm
Hydrophilic PTFE: 0.5μm, 1μm, 3μm, 10μm
Allowable operating temperature of large-flow folding filter element: polypropylene 65℃; other: 80℃
Recommended pressure drop for the replacement of the large-flow folding filter element: 20℃,2.4Bar
Large-flow folding filter element component material:
Filter material: polypropylene PP, polytetrafluoroethylene PTFE, polyether sulfone PES (hydrophilic)
Support / diversion: polypropylene
Folded filter cartridge housing / center rod / end cover: polypropylene
Folded filter element sealing ring material: silicone rubber, ethylene propylene rubber, etc.
The specification and accuracy of large flow filter element can be customized, which can replace all kinds of large flow filter element, and all kinds of interfaces can be customized.
Other Related Products：
PP microporous folded filter element
Wire wound filter element
Condensate filter element
