HFNX620Y400H Product introduction of high-flow water filter element:

HFNX620Y400H The high flow water filter element uses deep fine polypropylene or glass fiber film as the filter material, with a large diameter of 6 inch / 152mm, no center rod, one-way opening, and specially designed liquid flow from the inside to the outside to ensure that all pollutant particles are intercepted inside the filter element. The design of high flow rate obviously reduces the use of filter element and filter in the same flow application occasions, which greatly saves the input cost and labor cost of high flow water filter element.

HFNX620Y400H Performance characteristics of high-flow water filter element:

1. Allows the high-flow medium to pass through the filter material, which has the advantages of high efficiency, low pressure loss and long life.

2. The outer in and out structure of the high flow filter element makes it easy to replace the filter element, while keeping the pollutants intercepted on the outside of the filter element.

3. There is a pp support skeleton inside the filter element, which can withstand the maximum pressure difference of 0.245MPa.

4. The β value of the filter element is above 1000.

5. The filter case can be installed with multiple filter elements, which can use a wide range of flow, and can be used whether in startup or continuous operation.

6. The filter element is durable, and can also have the least and most economical configuration filter.

Other Related Products：

PP meltblown filter element

PP microporous folded filter element

High Flow Cartridge Filter