Home News & Events INDUSTRY INFORMATION GROUP NEWS

Replace the HF40PP010A01 high-flow water filter element

DATE:2023-10-31Number of views: Source:LEFILTER

Product details

Replace of HF40PP010A01 high-flow water filter element product overview:

Instead of HF40PP010A01 high flow water filter element uses deep fine polypropylene or glass fiber film as the filter material, with a large diameter of 6 inch / 152mm, no center rod, one-way opening, and specially designed liquid flow from the inside to the outside, to ensure that all pollutant particles are intercepted inside the filter element. The design of this high flow filter element and super high flow element makes the use of filter element and filter in the same flow application occasions significantly reduced, greatly saving the equipment input cost and labor cost.

大流量滤芯  (30)

Instead of HF40PP010A01 high-flow water filter element features:

1, allowing high flow medium to pass through the filter material, has the advantages of high efficiency, low pressure loss and long life.

2. The outer in and out structure of the high flow filter element makes it easy to replace the filter element, while keeping the pollutants intercepted on the outside of the filter element.

3. There is a pp support skeleton inside the filter element, which can withstand the maximum pressure difference of 0.245MPa.

4. The β value of the filter element is more than 1000.

5, the filter case can be equipped with multiple filter elements, can be used in a wide range of flow rate, whether started or continuous operation can be used.

6, the filter element is durable, but also can be the least, the most economical configuration filter

Technical specifications:

Filter material: glass fiber, polypropylene (PP);

Support / diversion layer: polypropylene;

End cover material: glass fiber reinforced polypropylene;

Seal ring material: ethylene propylene rubber, iron fluorine fluorine rubber.

Filter accuracy: 1 μ m, 3 μ m, 5 μ m, 10 μ m, 20 μ m, 50 μ m, 70 μ m, 100 μ m;

High operating temperature: 80℃;

High pressure drop: 3.4 Barat82℃

Recommended pressure drop for filter element replacement: 2.4Bar, 20℃

Suggested filtered water flow rate: 900 LPM

Application area:

RO security filtration, seawater desalination pretreatment

Filtration of power plant

Biopharmaceutical industry API, solvent, water filtration

Bottled water, liquid sugar, cooking oil, fruit juice, soft drinks, milk filtration

Paint, paint, petrochemicals

Microelectronics, film, fiber, and resin


Other Related Products:

Duplex filter

Backwash filter

PP microporous folded filter element