The high-flow filter element HFU660UY400H4W combines surface filtration and depth filtration, so that the throughput of a single filter can reach more than 70m³/h; the overall polypropylene design and hot-melt welding treatment can effectively prevent the end cover from falling off; the design of the sealed interface reduces the risk of side flow Risk, to ensure the sealing and reliability of the filter; the flow direction from the inside to the outside ensures that all impurities are trapped inside the filter element, reducing secondary pollution; the folded design increases the filtration area, making its pressure drop significantly lower than ordinary filter elements; The large-diameter design increases the dirt holding capacity and prolongs the service life; the number of filter elements required to be replaced is greatly reduced, saving labor costs; the convenient handle is involved, which significantly reduces the time for filter element replacement, making filter element replacement simple and portable.

Product features：

1. The filter element is durable and can be equipped with the least and most economical filter.

2. It allows high-flow media to pass through the filter material, which has the advantages of high efficiency, low pressure loss and long life.

3. The outside-in and inside-out structure of the large-flow filter element makes it easy to replace the filter element while keeping pollutants intercepted outside the filter element.

4. The β value of the filter element is over 1000. 

5. Multiple filter elements can be installed in the filter housing, which can be used in a wide flow range, whether it is started or continuous operation.

6. There is a pp support frame inside the filter element, which can withstand a pressure difference of 0.245MPa at most.

Technical Parameters：

1. Technical parameters of large flow filter element HFNX620Y100J:

2. Accuracy: 1um, 5um, 10um, 20um, 40um, 70um, 100um

3. Filter element size: Outer diameter: 152mm Length: 508mm, 1016mm, 1524mm

4. Operating conditions: Maximum operating temperature: folded polypropylene: 82C; meltblown polypropylene: 65C

5. Maximum pressure drop: folded polypropylene: 3.4bar, 82C

6. Melt blown polypropylene: 1.03bar, 65C

7. Recommended pressure drop for filter replacement: 2.4bar, 20C

Application field：

1. RO security filtration, seawater desalination pretreatment

2. Filtration of condensed water in power plants

3. Filtration of raw materials, solvents, and water in the biopharmaceutical industry

4. Filtration of bottled water, sugar solution, edible oil, fruit juice, soft drink, milk

5. Paints, coatings, petrochemicals

6. Microelectronics, film, fiber, resin

Project case：

Other Related Products：

Condensate filter element

Wedge mesh filter element

High Flow Cartridge Filter