Introduction

The filter element of the filter is made of chemical fiber filter material, which has the advantages of high filtration precision, large oil energy capacity, small original pressure loss, large dirt holding capacity, etc., and is equipped with a differential pressure transmitter and a bypass valve. When the filter element is clogged until the inlet and outlet pressure difference is 0.35MPa, a switch signal will be sent out. At this time, the filter element should be cleaned or replaced. If the machine cannot be stopped in time or there is no one to replace the filter element, the bypass valve installed on the upper part of the filter element will automatically open. Protection System. The filter is widely used in hydraulic systems of heavy machinery, mining machinery, metallurgical machinery, etc.

Application

The DRLF series filter is installed at the oil return line of the hydraulic system, and is used to filter out the metal powder and rubber that are worn by various components in the liquid, so as to keep the oil flowing back into the oil tank clean.

Technical Parameters

Note:*refers to filtration accuracy.If the medium is water-glycol,nominal flow rate is 63L/min,filtration accuracy is 10μm,and the transmitter is provided,the filter model is DRLF.BH-A2600x10P and the filter element model is SFX.BH-1300X10.

Connection Size

Model

Other Related Products

GLYC series High Viscosity Oil Purifier

LPFC P-all Oil Filter

Replacement for HYDAC Oil Filter Machine