Introduction

The filter is installed in the pressure pipeline of the hydraulic system to filter out the mechanical impurities mixed in the hydraulic oil and the gum, leachate, carbon residue, etc. produced by the chemical change of the hydraulic oil itself, so as to prevent the valve spools from jamming, the blockage of the throttle hole slit and damping holes, as well as the occurrence of faults such as the excessive wear of the hydraulic components.

The filter is equipped with a differential pressure signaling device, when the filter element is contaminated and clogged to the point where the differential pressure of the oil outlet is 035MPa, a switching signal will be issued, and the filter element will be replaced at this time, so as to achieve the purpose of protecting the safety of the system.

Main features and advantages

1.Reasonable design and stable operation.ZU-H and QU-H series filters adopt reinforced carbon steel cartridge shell and high-strength bolts to withstand high-pressure load.

2. Good cleaning effect. The filter mesh has precise holes, which can effectively remove suspended matter, particles and ions in the pipeline.

3. Long service life. Filter mesh is porous stainless steel Woven monofilament, corrosion-resistant and long-lasting.

4. Convenient maintenance. Cartridge structure, unloading the filter screen quickly replaced.

5. Comprehensive types. There are a variety of specifications and sizes to choose from, to meet the requirements of different loads and filtration accuracy.

6. Y-type probe to monitor the resistance of the filter. It is convenient to monitor the dirt accumulation of the filter screen.

Mainly used for

Process systems where suspended particles in pressure lines are strictly regulated.

Liquid filtration of crude oil, lubricating oil, fuel oil, etc.

Pressure water filtration in aquaculture and food industry.

Gas pipeline network filtration, etc.

PLEASE NOTE THE INSTALLATION!

Installation mainly requires a normal spanner and a torque spanner. For Y-type differential pressure monitoring probes, it is necessary to install them in a vertical position for correct monitoring.

It is recommended to take precautions to avoid skin contact with the liquid being filtered, especially in the food and water treatment sectors.

Other Related Products

DRLF series large flow oil return filter 

MP-FILTER filter element

ZU-A QU-A WU-A XU-A Series Oil Return Filter