The Parker Fulflo MegaFlow filter provides an effective replacement solution for deep and other 2-1/2" inner diameter filters in high-flow situations, such as reverse osmosis pre-filtration and similar nominal efficiencies. Each MegaFlow filter can handle a flow rate of 175gpm(662lpm), significantly reducing the number of filters and the size of the filter shell. One 6-inch (152mm)MegaFlow filter can handle the same amount of material as eight 2-1/2 inch inner diameter 40-inch filters. The positive O-ring seal and the built-in handle make the installation of the filter fast, safe and convenient. The MegaFlow filter can be selected from polypropylene or cellulose filter media with nominal accuracy grades ranging from 0.5, 1.5 and 10 microns.

Advantage

The high flow capacity means that fewer filter elements are required, reducing the labor cost of replacing filter elements

High circulation allows us to use smaller filter shells and invest less in infrastructure; The integrated handle makes the replacement of the filter element quick, convenient and safe; O-ring seal makes the filtration performance intact; The choice of polypropylene and cellulose media allows us to apply our products in both water-based and non-water-based flows

Body application occasions; The heat-treated polypropylene and phenolic resin mixed cellulose filter media can effectively reduce particle breakage and impurity unloading, which usually occur in deep filter elements; The large surface area folding design makes the pressure drop of the filter element lower and the service life longer; The structural materials of the polypropylene filter are in line with the FDA-standard CFR-21 specification; It can be fitted with horizontal or vertical filter housing with a flow rate of up to 3,325gpm(12,585LPM).

Apply

Potable water;Treating water;Reverse osmosis pre-filtration;Lubricating oil;coolant

Technical specification

Structural material

Medium: polypropylene fiber (code P); Cellulose blended phenolic resin (Code C)

Support layer: polypropylene (code P); No support layer (code C)

End cover: fiberglass filled polypropylene

O-Rings: Buna-N, EPR, Silicone,Fluoroelastomer

Recommended operating condition

Change pressure differential 35 psid (2.4 bar)

Maximum flow rate: 175 gpm (662 lpm)

Maximum temperature: 200°F (93°C)

Maximum differential pressure: 150 psid (10 bar)

Other Related Products：

Condensate filter element

Wedge mesh filter element

High Flow Cartridge Filter