Material: Fiber Glass

Application: Industry, Medicine, Textile, Metallurgy

Type: Oil Filter

Filter Connector: Flat Connector

Filtration Grade: Medium Filter

Activated Carbon Filter Type:No

Product Pparameters:

Product Description:

Facet CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from jet fuel.

The Facet coalescer separator housings equipped with CAA Series 5 coalescer and companion separator cartridges have been tested and fully qualified to meet the performance requirements of API Bulletin 1581, Fifth Edition, Category C, Type S. (Category C replaces the previous class A, B, and C of API-1581 3rd Edition.)

Built for balanced fluid flow-thru and structural strength, each CAA Series 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal center tube - all encased in an outer sock material. All are 6" OD (152 mm) by 3 1/2" ID (89 mm) and available in standard interchangeable nominal lengths in increments from 11 1/4" (290 mm) to 57 1/4" (1450 mm).

The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance - uniform threads, no shrinkage, no galling and no gasket to recover.

Standard Design Features:

• Multi-layered media for increased solids holding capacity

• Ultra-fine solids removal

• Maximum water coalescence

• Balanced cartridge flow characteristics

• Recommended maximum operating temperature: 240°F (115oC)

• Withstands in excess of 75 psi differential pressure

• PH range from 5 to 9

• Screw base or open-end configuration

Materials:

• All metal components are treated against corrosion

• Screw base ends are injection molded, glass-filled nylon with locked-in gaskets

• Buna-N gaskets-other materials are available on request

Relative Part Number: