Industry information

Membrane permeation element is characterized by low pressure operation, high water production and good desalination performance.

LEFILTER high flow filter cartridges are made of fine polypropylene or glass fibers with a depth of 6 inches/152 mm, a large diameter, no inner core, and only one hole.

When using fuels or other fluids, it is essential that they are free from particulate contamination and free water.If the fluid does not meet the required cleanliness standards , fouling and corrosion of the equipment downstream may occur, leading to expensive maintenance costs and reduced component...

The Lefilter SepraSol™ Plus Liquid/Gas Coalescer removes liquids and solids from high flow gas streams that contain high concentrations of liquids.

Application: filter new oil, fill new oil and filter, purify the oil in use, bypass filtration when the hydraulic lubrication system is working.

When using fuels or other fluids, it is essential that they are free from particulate contamination and free water.If the fluid does not meet the required cleanliness standards , fouling and corrosion of the equipment downstream may occur, leading to expensive maintenance costs and reduced component...

Pulse jet bag dust collector is composed of the following parts: Shell part, Ash hopper and ash unloading mechanism, Inlet and outlet air box: including inlet and outlet air pipeline and centre partition. Pulse ash cleaning device, Compressed air pipeline and pressure reducing device, oil-water sepa...

When dust collector removes dust, it is through the suction of the fan that negative pressure is formed in the dust collection hood and the dust is sucked into the dust collector. Inside the dust collector's centre box there are a number of dust bags. The dust bag is breathable, there is a pressure ...

Pulse jet bag dust collector may occur failure and disposal methods

The dust collector is installed next to the dust generating machinery and equipment, and the metal or plastic dust suction pipe and dust suction hood are configured by the user according to the size of the air inlet on the dust collector.