Home > Products > WASTEWATER TREATMENT > Water Filter Element > Wire Wound Filter Element >

Wire wound filter element Introduction Working Principle Advantages Technical parameter Details Cases

Introduction

Wire wound filter element lefilter

Wire wound filter element

The wire wound filter element is a kind of deep filter element, which is used for the filtration of low viscosity and low impurity quality. It is made of textile fiber thread (polypropylene thread, degreased cotton thread, etc.) which is precisely wound on the porous skeleton (polypropylene or stainless steel) according to the specific process. It has a honeycomb structure with sparse outside and dense inside, and can effectively remove the suspended solids, particles, rust and other impurities in the fluid. It has very excellent filtration characteristics.

Application pharmaceutical industry, food industry, electronic industry, petroleum and chemical industry, etc.
Filter media suspended solids, particles, water quality dirt, bacteria and algae, rust, etc
Email overseas@lefilter.com

Working principle

The wire wound filter element is formed by winding the textile fiber on the multi skeleton in a specific way. When winding, the filter elements with different filtering precision can be made by controlling the winding density of the filter elements. The filter element has a large outside diameter and a small inside diameter, which has an excellent deep filtering effect.

Different connecting frames of wire wound filter element

Different connecting frames of wire wound filter element
Different connecting frames of wire wound filter element

Advantages

  • Wire wound filter element advantage

    Large filter area;
    Large filter area

    Precision

    High filtering precision:

    Relative filtration accuracy, the retention rate is more than 90%, A wide range of filtration precision can meet various application requirements, with good pollution interception effect and longer service life.

  • Wire wound filter element advantage

    Internal thread structure;Enhanced compression resistance;

    Flow

    Internal thread structure for enhanced compression resistance:

    Wide chemical compatibility, large flux, low differential pressure, Can be washed and regenerated, economical, Sterilize by chemical method, in-line steam sterilization.

  • Wire wound filter element advantage

    Polypropylene composite filter membrane

    Material

    Food grade material

    Filter media: polypropylene fiber membrane Upper and lower flow support material: polypropylene Support frame and structural elements:Polypropylene Sealing material: silicone rubber, nitrile rubber, EPDM rubber, fluorine rubber.

  • Wire wound filter element advantage

    Structure

    Structure

    Structure:

    Sparse outside and dense inside, honeycomb structure, Large amount of pollution.

Technical parameter

Wire wound filter element technical parameter

Name: Wire wound filter element Filter Length:10″,20″,30″,40″

Filter Outer Diameter:Φ60mm,Φ65mm; Filter inner diameter:Φ28mm,Φ30mm;

Central frame: polypropylene PP frame, stainless steel frame; Maximum pressure: ≤0.5MPa; maximum pressure drop: 0.2MPa.

Filtration accuracy:1μm,5μm,10μm,20μm,30μm,50μm,75μm,100μm; Filter material: polypropylene PP thread, absorbent cotton thread, glass fiber thread

Maximum working temperature: polypropylene thread: polypropylene frame≤60°C; stainless steel frame≤80°C. Absorbent cotton thread: stainless steel frame≤120°C.

Can be customized according to different working conditions

Product details

Cases

  • Circulating water treatment site of a coal chemical enterprise
    Circulating water treatment site of a coal chemical enterprise in Shanxi

    Application: security filter elementFlow: 20t/h

  • The use site of an environmental company
    The use site of an environmental company in Shandong

    Application: Circulating water treatmentFlow: 20t/h

  • After use by a water treatment company
    After use by a water treatment company in Henan

    Uses: security filter circulating water treatmentFlow: 200m3/h

CUSTOMIZATION SERVICE PROCESS

Provide customization services according to different working conditions